How To Turn Off Sprinkler System For Winter. A ball valve is open when the handle is parallel to the pipe and closed when it is perpendicular with the pipe. Drain down your sprinkler system.
Next, you will want to manually drain the. You can consult your owner’s manual, if you have one, for the necessary steps. Find the main water valve to the irrigation system and turn it off.
Table of Contents
If You Have A Brass Or Pvc Ball Valve, Gently Turn The Valve Handle 90 Degrees To Open Or.
This video quickly shows you 6 steps a homeowner needs to take in preparing their sprinkler system for a sprinkler blowout. If you want to save a couple of bucks, use some straw and pack it in the box. Turn the dial to the auto position and move the slide switch for the desired valve up to the manual on position to test valves on orbit's individual station slide timers.
Luckily The First Step Is An Easy One:
If one zone won’t budge, check for a blown a fuse or tripped breaker. Just shut off the water supply to the irrigation system. This should activate all zones.
An Air Compressor Can Help.
How to turn off water to sprinkler system. A ball valve is open when the handle is parallel to the pipe and closed when it is perpendicular with the pipe. To turn off your sprinkler system at the controller.
This Water Shut Off Is Typically Located In Your Basement, Crawlspace, Or Mechanical Room.
Click on suspend all zones. Your goal is at least 1″ of water a week for your lawn. If your controller doesn’t turn on automatically when the power comes back, press each button in sequence.
You can buy special sprinkler insulation from most hardware stores. Then, open the valves to drain any water remaining in the system. Slowly open the main shutoff valve to let water into the sprinkler system.