How To Properly Measure Driver Shaft Length. A longer shaft produces more swing speed. This will give you you an accurate and usga standard for measuring your golf driver.
It is measured at the edge of the grip cap (not the very top) at the end of the grip. Measure the length that you want to shorten on the shaft. In reality, the average length of a driver used on tour is 44.5in while the average shaft length found in drivers on the shop shelves is around 45.5in.
Table of Contents
Length Of The Shaft Basically A Matter Of Preference Based On Feel, Shaft Length Can Be Roughly Determined By The Height And Arm Length.
Most male golfers are wielding drivers that measure 45 to 48 inches, the maximum allowed under the united states golf association's rules of golf. How short should your driver be? By following the simple steps outlined in this guide you will be able to measure a driver shaft to fit your own specific needs in no time.
Driver Lie Angle Is The Measurement Between The Shaft And The Center Of Sole On A Driver.
In all cases except putters with no heel, this method is used. However, in the 21st century a standard driver is considered to be 45 inches. A 44” driver helps golfers to achieve a distance of about 275 yards.
The Standard Length Of A Driver For Men Used To Be 43.5 Inches With A Steel Shaft And 44 Inches For A Graphite Shaft.
With each position affecting how the driver interacts with the ball. Fix the golf club in position in a vise. The 48″ rule can be described as using length by placing both hands around the putter’s shaft and on its axis (at the intersectance where it intersects the edge of the grip cap by at the 48” end of the shaft).
If You Are Purchasing Your Clubs From A Retailer, Be Sure To Note Your Desired Club Length When Making Your Purchase.
If you ever get the luxury of being personally fitted for clubs, the club fitter will likely use a chart like this one when selecting your driver shaft length. Add an extra 1/8 inch to this and mark the position using a permanent marker. There is an optimum driver shaft length with which golfers will achieve maximum clubhead speed and it will vary from player to player.
Some Players Get Good Control And Distance When They Use This Club.
So the next time you are looking to measure your golf driver make your sure you follow this basic instructions. How to measure golf club shaft length? 44” is the standard length for drivers with steel shaft, for male players.