How To Cut Vinyl Plank Flooring With A Jigsaw. It's possible to place boards around your toilet or pillar. Produces clean, precision cuts with no splintering and smooth finish.
Also, make sure it has a streamlined style that fits everywhere. Use the tape measure to mark the board for the cut. Again, remember to make your mark on the scrap side of the plank, the piece to be trimmed away.
Table of Contents
Measure And Draw Your Cut Line.
Cuts a variety of material, including laminate flooring, fiber cement board (hardieplank , cemplank ), engineered wood and vinyl siding up to 13” wide and 19/32” thick. Also, make sure it has a streamlined style that fits everywhere. To cut the thick vinyl plank flooring, use a jigsaw.
Place Your Tape And Draw The Line Again.
Lay the measured and marked plank on the floor or on something that you don’t mind cutting. Then “crack” the pvc sheet along with the cut, ie you bend it apart until it breaks along the cut edge. Best jigsaw blade for cutting laminate floors.
Use The Tape Measure To Mark The Board For The Cut.
To cut the planks, simply pull the measuring tap and pull the tape measure toward the area you want to cover. A utility knife, sometimes called a box cutter, is probably the one tool that is most commonly used to cut vinyl planks for flooring. In this video i show how to cut vinyl plank flooring around a toilet vinyl plank flooring is the going.
The Mark Should Be Made On The Waste Side With Something Visible Like A Carpentry Pencil Or A Grease Marker.
Measure in from the side near both ends of the plank, and make a small mark where the cut will be made. If it is too short, cut a new plank in half and use one half to start the second row. Alternatively, you can position it lengthways along the edge of a countertop or table.
Always Use The Backside Of The Vinyl Plank Flooring To Keep Pencil Marks And The Potential For Damage To A Minimum.
That's why they call it a multitool, so if you're only going to invest in one tool, my recommendation would be the jigsaw have linked down below for a cheap version as well as one that's got a little more features on it, but this will do everything you need it to and can make all the cuts for your vinyl plank flooring, and then you pair that with just a utility knife for the end cuts. Clamp the board and start the saw. To cut vinyl planks with a utility knife, you will need to follow a few basic steps.