6.0 Powerstroke Crank No Start No Oil Pressure

6.0 Powerstroke Crank No Start No Oil Pressure. Extended crank for about 20 seconds the pressure starts to climb slightly and when it hits approx. Here’s a video explaining what base oil pressure should be on a 6.0 powerstroke.

2003 Powerstroke 6.0 oil pressure test with cranking
2003 Powerstroke 6.0 oil pressure test with cranking from www.youtube.com

I connected a volt meter to the sensor wires and measured th esensor voltage while cranking the engine. Icp should be over 500 cranking. Took apart the front to expose the lo pressure oil pump, gears and cover damaged.

Still No Star, But Now Showing A More Accurate Oil Pressure, When Cranking It Shows A Slow Climb To As High As 530 Psi, But Only For A Split Second, Then I Drops To 200'S And Then Fluctuates Between 200'S And 300'S, Now Its Looking Alot Like A Leak, Ipr Is Still Pegged At 85% When Cranking.

Its a allen plug on the super duties i believe. It could either arise from a low fuel quality, low oil levels, etc. Its been in my driveway since.

Sounds Like Maybe A Weak Lpop?

The 6.0l diesel used in the dodge ram takes 3000psi. Icp = injector control pressure. If it still doesn't have pressure you got a bad hpop or one of dozens of other options for high pressure oil leaks.

Drove Fine Once On Flat Ground.

Pressure regulator, bad high pressure oil pump (hpop), etc are all suspect. If you have a 6.0 powerstroke no start and no base oil pressure this may help identify the problem. 1 on page 38 shows a simple oil flow schematic for the 6.0l diesel engine.

Another Way To Identify A Bad 6.0L Powerstroke Is A Decrease In Its Acceleration, Fuel Economy, And Power.

No oil pressure on instrument cluster can be several reasons: I have an 03 escursion with a 6.0 and no start condition. Other wise your hpop could be draining back somehow or possible.

Low Oil Pressure Gauge Indicate A Fault With Oil Pressure Switch Or Oil Pump.

Discussion starter · #1 · apr 21, 2010. Back in july a loss of power when towing uphill. Took apart the front to expose the lo pressure oil pump, gears and cover damaged.